CFosSpeed - The fastest to date, the German network driver to break through broadband technology Traffic Shaping. Optimizes DSL, cable and modem lines, ISDN, mobile and peer (P2P) networks, operation of online games, VoIP and streaming media. Works with virtually any equipment and almost all over the world. cFosSpeed will allow you to have a super-fast internet surfing and reduce download time and response. Especially enjoys high esteem among fans of online games, peer to peer networks and consumer audio and video.The standard solution to compensate for this effect was to increase the size of the TCP-window that allows you to send more data without immediate confirmation. The main problems here are to increase the ping (latency) and significant delays during the rendering of web pages. A delay of up to two seconds is not uncommon for TCP-window size of 512KB. In short, the large size of TCP-window still will not let you get full speed downloads.
On the other hand, cFos Traffic Shaping arranges data by priority in order that important packets are always earlier than usual. Thus, the evidence always come on time, and the transfer will never clog your connection!
Technology cFos Traffic-Shaping, recognizing the important types of bags and placing them in accordance with the priorities, not only smooths the Internet traffic, but also provides a low-ping. This not only accelerates surfing and download speed increases, but also offers advantages in online gaming.
Connections:- Broadband: Cable and DSL
- Narrow band: Modem and ISDN
- Mobile (UMTS, HSDPA, GSM, GPRS, HSCSD)
- DSL, PPPoE
- DSL, PPPoA (VCmux and LLC)
- DSL, PPTP
- VDSL
- Cable
- ISDN
- IP over AAL
- RFC1483/2684 bridged
! The-weight class parameter that is specified in the default settings does now specify the weight of all rx-streams in a class and no longer the weight
of a single stream. This helps to keep fast sending streams of low priority (like P2P) slower and higher prio streams faster. A exacter regulation is
still in development.
+ Added-delay parameter for classes. With this you can make sure packets in that class are sent only after a minimum delay time in the queue. That is,
delay cann add some ADDITIONAL delay for packets. By default, all delays are set to 0, i.e. no additional delays are introduced.
+ Added-class filter expression. This allows filtering after the class of a TCP stream, ie you could use the filter "-tx-higher-class lower-c lower" to filter out all TCP ACKs of streams that are classified as lower.
Download Free cFosSpeed v6.61 Build 1884 Beta FullPlease subscribe, leave a comment, follow this blog and share this article with your friends and colleagues.
by: http://kedirizone.blogspot.com
0 comments:
Post a Comment